Cycloidal reducer lubrication review record Publisher: Micro Cycloidal | https://microcycloidal.com Guide: https://microcycloidal.com/learn/brushless-motor-cycloidal-reducer-lubrication-guide Record template reviewed: 2026-10-29 This blank record supports a model-specific supplier review. It does not approve a lubricant, fill quantity or interval. Leave unknown specifications blank and request written confirmation. Identification and approval - Date / responsible person: - Reducer model / serial / ratio: - Motor model / rated and peak input speed: - Assembly drawing and revision: - Approving supplier / document and revision: Duty and installation - Load profile / duty cycle / output travel / dwell: - Mounting orientation and range: - Cooling / airflow / ambient temperature: - Reducer housing sensor location / method / measured temperature: - Motor / flange readings and sensor locations: - Approved assembly temperature limits: Lubrication and service history - Existing lubricant identity / batch / known mixing history: - Approved lubricant / mounting-specific fill mass or volume / units: - Approved filling / changeover / sealing procedure: - Approved operating-hour interval / calendar deadline: - Service date / accumulated operating hours / observed symptoms: - Supplier instructions or unresolved questions: Schedule arithmetic (only after supplier approval) - Approved interval (operating h): - Hours since applicable service (operating h): - Average operating h per calendar day (include shutdown days): - Remaining hours = max(0, approved interval - hours since service) - Calendar days = remaining hours / average operating h per calendar day Apply an earlier supplier calendar deadline; investigate adverse conditions before the interval ends. Arithmetic is not a grease-life prediction. Attach the approved drawing and service records in your email client. Request written confirmation at inquiry@microcycloidal.com.